TANGSHAN MINE MACHINERY FACTORY
TANGSHAN MINE MACHINERY FACTORY
Add to Cart
Principle overview
Flotation machine is applicable to grading of non-ferrous and ferrous metal, also applicable to grading of nonmetals, such as coal, fluorite and talc. The impeller of flotation machine is driven by motor v-belt, centrifugal effect is thus produced and negative pressure is formed, which, on the one hand, absorbs adequate air to mix with ore pulp, and on the other hand, stirs the ore pulp and mixes the ore pulp with medicines and refine bubbles; thus, the minerals will be adhered to the bubbles and float to the pulp surface and form foam layer. Adjust the opening of flash board and cone valve and control the liquid level to make the useful bubbles scraped out by scraper blade. For selection of flotation machines, the following information shall be indicated: Models, specifications and number of flotation cells. Number of scraper blade devices (left or right). Single-side scraping or double-side scraping. Numbers of feed boxes, middling boxes, tailing boxes, feed pipes and middling pipes. Liquid level can be controlled manually, electrically or automatically. Deployment diagram of flotation technological process should be provided.
The flotation machine is driven by the V-belt drive of the motor to rotate the impeller, which produces centrifugal action to form a negative pressure. On the one hand, it inhales sufficient air to mix with the ore pulp, on the other hand, it stirs the ore pulp to mix with drugs, and at the same time refines the foam, so that the minerals adhere to the foam. Float to the pulp surface and form mineralized foam. Adjust the height of the ram to control the liquid level so that the useful foam is scraped off by the scraper.
SF flotation machine is a mechanical stirring flotation machine with dual functions of self-suction air and self-suction slurry. It adopts a new structure of forward-tilting tank body double-blade water wheel equipped with draft pipe and false bottom device, and the pulp in the tank carries out double circulation up and down according to a fixed flow mode, which is beneficial to the suspension of coarse-grained minerals. SF flotation machine is mainly composed of trough body, impeller, spindle parts, motor scraper and its transmission device, etc., which are composed of draft pipe and false bottom with volume greater than 10m3.
This series of flotation machines is suitable for the separation of non-ferrous metals and nonmetals such as coal fluorite and talc.
Equipment characteristics
1. Large inspiratory volume and low power consumption;
2. Each tank has triple functions of air suction and flotation. It is a self-contained flotation circuit without any auxiliary equipment, which is convenient for changing the process flow;
3. Reasonable pulp circulation can minimize coarse sand precipitation
4. The automatic control device with pulp surface is convenient to adjust;
5. Impeller with backward tilting upper and lower blades The upper blade produces pulp for upper circulation and the lower blade produces pulp for lower circulation.
SF flotation machine and JJF flotation machine can be configured as a combined unit. SF type as suction tank and JJF type as DC tank, and the whole unit is installed horizontally.
Suitable for classification, dehydration and concentration operation of different material particle sizes.
| Name | SF Series Flotation Machine In Ore Dressing |
| Attributes | Mining Equipment |
| Model | Flotation |
Parameter
| Model and specification | Effective volume | Dimensions of tank | Processing capacity | Installation power | Impeller speed | Scraper speed | Volume of Air intake | Single Tank Weight | |
| L×W×H | (kw) | ||||||||
| m3 | m×m×m | m3/min | Stirring use | Scraper use | r/min | r/min | m3/m2.min | kg | |
| SF-0.15 | 0.15 | 0.5×0.5×0.6 | 0.06～0.18 | Y100L-6 | Y80L-4 | 536 | 16 | 1 | 269 |
| 1.5 | 0.55 | ||||||||
| SF-0.37 | 0.37 | 0.7×0.7×0.75 | 0.2～0.4 | Y90L-4 | Y80L-4 | 383～473 | 17 | 0.8～1 | 468 |
| 1.5 | 0.55 | ||||||||
| SF-1.2 | 1.2 | 1.1×1.1×1.1 | 0.6～1.6 | Y132M2-6 | Y90S-4 | 312 | 16 | 1 | 1373 |
| 5.5 | 1.1 | ||||||||
| SF-2.8 | 2.8 | 1.7×1.6×1.15 | 1.5～3.5 | Y180L-8 | Y100L-6 | 268 | 16 | 1 | 2138 |
| 11 | 1.5 | ||||||||
| SF-4 | 4 | 1.85×2.05×1.2 | 2～4 | Y200L-8 | Y100L-6 | 220 | 16 | 1 | 2582 |
| 15 | 1.5 | ||||||||
| SF-8 | 8 | 2.2×2.9×1.4 | 4～8 | Y250M-8 | Y100L-6 | 191 | 16 | 1 | 4129 |
| 30 | 1.5 | ||||||||
| SF-10 | 10 | 2.2×2.9×1.7 | 5～10 | Y250M-8 | Y100L-6 | 191 | 16 | 1 | 4486 |
| 30 | 1.5 | ||||||||
| SF-16 | 16 | 2.85×3.8×1.7 | 5～16 | Y250M-8 | Y100L-6 | 191 | 16 | 1 | 8320 |
| 45 | 1.5 | ||||||||
| SF-20 | 20 | 2.85×3.8×2 | 5～20 | Y250M-8 | Y100L-6 | 191 | 16 | 1 | 9828 |
| 30×2 | 1.5 | ||||||||
Company introduction
Tangshan Mine Machinery Factory is a specialized manufacturer producing complete sets of equipment for metallurgy, mining, building materials. environmental protection as well as the design and manufacture of a complete set of sand and gravel materials. and the design and manufacture of dry tailings discharge. The company was established in 1971 and became a joint venture in 1997.Various processing and testing equipment: 8 m, 5 m, 4 m vertical lathe, 8 m, 5 m, 3.15 m gear milling machine, 6 m planer, precision boring machine, medium frequency quenching. and other large processing equipment and automatic welding, more than 300 sets of ultrasonic flaw detectors, W15-23 material testing machines, vibration aging devices, etc.The main products are: various models and specifications of Jinma brand crushers, ball mills, classifiers, Magnetic separator, dewatering screens, linear screens, screening machine, feeders, vertical roller mill, etc.Among them, 17 products have obtained national patents. Among them, the grinding machine and grinding balls have been awarded many national honors.
FAQ to save your precious time!
Q1: Hi, are you a mining machinery manufacturer?
Answer: Yes, we are a professional manufacturer of mining machine. Our company welcomes customers to visit our factory at any time.
Q2: How long is the warranty period of your equipment? Does your company provide spare parts?
Answer: The warranty period of our machine is one year. For those wearing parts, we guarantee to provide high-quality parts for a long time.
Q3: How long does it take to deliver?
Answer: Production usually starts after receiving the advance payment. Small machine is guaranteed to be delivered within one month. Large-scale machine is guaranteed to be delivered within 2-3 months.
Q4: Do you provide machine operation guidance?
Answer: Yes. We have professional engineers for installation, commissioning and operation guidance.